36
Care and Maintenance
Replacing the light bulb
To replace the light bulb, proceed as follows:
• Disconnect the oven from the power supply. Take the plug out of the socket or switch
off the oven's power circuit.
• Unscrew and remove the glass light cover.
• Remove the light bulb. Warning! The bulb may be very hot.
• Fit a new G9 250V/25W bulb. Follow the lamp manufacturer's instructions.
• Screw the glass light cover into place.
• Connect the oven again to the power supply.
Importante Note:
The glass light cover has a rubber gasket to prevent the steam from entering in
contact with the lamp. Please make sure the gasket is in the correct position before
screwing the glass light cover in position.
Downloaded from
www.Manualslib.com
manuals search engine