Milnor 60044SP2 Wartungsanleitung Seite 41

Maintenance Components—Large Extractors
3.1.6.
Figure 16: Grease Ports for Drive Bearings—60044_ and 72044_ Models
Front Bearing—60044WP_ and 72044WP_
Soil Side Bearing—60044SP_ and 72044SP_
Jackshaft Bearings—60044SP_ and
60044SP_
Brake Band
Bushings—60044WP_ and
72044WP_
.
Rear Bearing—60044WP_ and 72044WP_
Clean Side Bearing—60044SP_, 72044SP_
Idler Shaft Bearings and Other
Components—60044SP_ and 72044SP_
1. Grease fitting for bearing. One place.
2. Grease fitting for seal. One place.
3. Breather for bearing housing. Keep clean.
4. Relief port for seal. Remove spilled grease.
5. Grease ports for jackshaft bearings. Three places.
6. Grease ports for idler shaft bearings. Two places.
7. Grease ports for Hydrocushion
remote mount configuration only on 72044SP_, right side.
8. Grease port for brake seals. One place.
37
Chapter 3. Routine Maintenance
[Document BIWUUM03]
Legend
™
bottom bushings. This
PELLERIN MILNOR CORPORATION