Milnor 60044SP2 Wartungsanleitung Seite 37

Figure 10: Soap Chute and Optional 5-compartment Supply Injector. These are examples. Your
machine can look different.
Soap Chute
1. Do not let chemical supplies stay on surfaces.
2. Water pressure regulator. See
3. Adjustment screw
4. Water pressure gauge.
5. Strainer inside
.
CAUTION 27 : Risk of injury and damage—Chemical supplies can splash on personnel
and machine surfaces if water pressure is too high.
• Make sure the pressure is set as told in the maintenance summary.
Supply Injector
Legend
caution statement 27
.
33
Chapter 3. Routine Maintenance
Flush Water Adjustment
Components
PELLERIN MILNOR CORPORATION