Milnor 60044SP2 Wartungsanleitung Seite 28

Chapter 3. Routine Maintenance
Table 5: Components that Become Worn
Examine. Tighten or replace if necessary, to prevent shutdowns and unsatisfactory performance.
Mark
Do this each
1 2 3 4 5 6
x 200 hours
x 200 hours
x 200 hours
x 200 hours
PELLERIN MILNOR CORPORATION
Speak to your dealer for replacement parts
Component
drive belts and pulleys
tubes and hoses
cylinder door latches
Staph barriers—Staph Guard
models only: internal barrier,
flapper valve, and barrier
around machine (by others)
24
More Data
See Supplement 1 and
Examine hoses and hose connections for
leaks.
These components must be serviceable for
safe operation. See Figure 18
®
These components must be serviceable to
prevent air movement from the soil side to the
clean side. See Figure 19
Figure 7