Use Original Accessories; Prior To Initial Use; Initial Operation - Silvercrest 16463 Bedienungs- Und Sicherheitshinweise

Safety / Prior to Initial Use / Initial Operation
lead to an overheating of the appliance.
Damage of the appliance is the consequence.
Never immerse the appliance in water and
always pull the mains plug before cleaning or
transporting it.
Make sure that the details on the rating label
are in conformity with your mains voltage.
Only connect the unit to alternating current.
Do not at all operate this unit with an external
timer or a separate telecontrol system.
Do not operate the appliance when the power
cord
ATTENTION! A damaged power cord
presents a hazard of life by electric shock.
Have appliances, which do not work faultlessly
or which are damaged, immediately and only
checked and repaired by the after-sales service.
Do not use the power cord
the appliance. Keep the power cord away
from hot surfaces, sharp edges and mechanical
forces. Damaged or entangled cords
crease the risk of an electric shock.
Do not operate the appliance outside. Never
let the power cord
during operation.
Unplug the power cord
operating the appliance.

Use Original Accessories

Only use accessories and additional equipment
stated in the instruction manual. The use of other
products or accessories than recommended in the
instruction manual may present a risk of injuries
for you.
8 GB/IE/CY
Downloaded from www.Manualslib.com
Avoid the hazard of
life by electric shock:
Check the power cord
for damage or deterioration.
18 or the mains plug is damaged.
18 for unplugging
become wet or damp
18
when you are not
18
manuals search engine

Prior to Initial Use

Clean all detachable parts prior to the initial use
with warm soapy water and dry them carefully.
Wipe the interior of the base of the appliance /
water tank

Initial Operation

Observe the mains voltage. The mains voltage of
the power source must be in conformity with the
details on the rating label of the appliance. Appli-
ances declared with 230 V can also be operated
18 regularly with 220 V.
Place the base of the appliance
ble, even surface.
Then place the black turbo ring
heating element
18
Make sure that the larger side faces down-
wards.
Now fill the base of the appliance / water tank
with cold water up to the MAX mark
10
Note: Consider that the base of the appliance /
water tank
least up to the MIN mark
18 in- ATTENTION! HAZARD OF BURNS!
Make sure that the water does not exceed the
MAX mark
out of the appliance during operation.
ATTENTION! Do not add anything like sea-
sonings etc. to the water. This may affect the
steam flow and / or damage the surface of the
base of the appliance / water tank
heating element
Now place the black condensate collection
basin
7
Make sure that the semi-circular elevation
points to the front towards the keypad and is
level. Thus, the turbo ring
position.
Place the food in the steam trays
Ensure that all parts are positioned correctly
before switching on the appliance.
ATTENTION! Never use bowls or other
parts, not especially produced for this appli-
ance. Otherwise, there may be the risk of inju-
with a damp cloth.
10
10
8
mounted in the centre.
11
10 has to be filled with water at
.
9
. Otherwise, hot water may spurt
19
11 .
onto the base of the appliance
will be kept in
8
3
on a sta-
onto the
.
19
10 and the
.
10
, 4 , 6 .