Kärcher MIC 70 Bedienungsanleitung Seite 55

Navigation display
1
Display of time and date
2
Drive
3
Hydraulic oil temperature
4
Display for transport mode or working mode
5
Indication for travel direction preselection "reverse"
6
Travel speed display
7
Indication for travel direction preselection "forwards"
8
Warning lights / indicator lights
9
Engine cooling water temperature
10
Filling level of fuel tank
11
Engine speed
12
ATTENTION
The menu item <Service> is reserved for authorised cus-
tomer service personnel.
Menu
1
Selection of <Settings> menu item
2
1. Switch on the ignition.
2. Press the function button for the menu and navigate to
<Settings>.
3. Use the function buttons on the navigation display to
navigate within the menu.
4. Select the settings.
5. Press <o>: Confirm selected setting.
6. Press <x>: Return / cancel.
7. Navigate to <Time> in order to set the time.
Setting the time
To save the time and date, the system has to be restarted.
8. Press <o>, the system will be restarted. Date and time
are saved.
9. Press <x> to cancel.
6.7.3 Setting the language on MIC 70
1. Switch on the ignition.
2. Press the function button for the menu and navigate to
<Settings>.
3. Confirm using the circle symbol <o>.
4. Use the <Arrow to right> function button to navigate to
the right-hand level.
5. Use the <Arrow down> function button to navigate to the
language.
6. Select the required language.
7. Switch off the ignition - the selected language is saved.
6.7.4 Settings for working mode
Note
When switching over from TRANSPORT MODE to
WORKING MODE (see chapter8.1 Operating programs),
the engine speed and speed settings are changed.
Note
If the potentiometer for engine speed (see chapter6.10 Op-
erating consoles) is not in the end position (0), then a dis-
play will appear.
English 55