hanseatic 65M90E3-E11B200 Gebrauchsanleitung Seite 50

Page EN-14 The oven
Start the cooking process
The following description applies to all func-
tions/heating modes except for
See below.
(7) (8)
88:88
888
1. Selecting a function
Turn the function dial (7) until the dis-
play (10) shows the corresponding symbol
and its standard temperature.
2. Adjusting the temperature
Turn the temperature controller (13) until
the display (10) shows the desired temper-
ature.
3. To confirm the displayed temperature and
start cooking, tap the
4. Changing the cooking time
To change the cooking time, turn the func-
tion dial (7) until the display (10) shows the
desired cooking time (
Area
0 – 30 minutes
00:30 – 09:00 hours
5. To confirm the displayed cooking time, tap
the sensor (11).
The display shows the maximum cooking
9:00
time of hours, and the standard tem-
perature flashes.
If you don't want to change the temperature:
1. Turn the function dial (7) until the dis-
play (10) shows the corresponding sym-
bol and its standard temperature.
and .
(11) (13)
c c
sensor (11).
0:01 9:00
to ).
Steps
1 minute
5 minutes
2. To confirm the function selection and start
cooking, tap the sensor (11).
The display shows the maximum cooking
9:00
time of hours, and the standard tem-
perature flashes to indicate that the oven is
still heating up. For functions with circulat-
ing air or hot air, you will also see a rotating
fan symbol. The oven lighting is on. You will
hear a soft sound coming from the external
cooling fan.
Once the preset cooking duration has
elapsed, you will hear five signal tones and
the oven will switch off automatically.
The temperature display flashes until
the desired temperature is reached. As
soon as the desired temperature is reached,
the temperature display lights up continuous-
ly.
Interrupting/ending the
cooking process
To interrupt the cooking process
– tap the sensor (12) once.
The remaining cooking time and the cur-
rent temperature will flash in the display.
To continue cooking, tap the
(11).
– To end the cooking process, tap the
sensor (12) twice.
sensor