Herunterladen Inhalt Inhalt Diese Seite drucken

Functions And Cleaning; Initial Start-Up; Stopping - Zummo Z1 Nature Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Z1 Nature:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 51

6. FUNCTIONS AND CLEANING

It is advisable to turn the machine off at the mains before starting any cleaning processes.
Do not wash the machine using water jets and/or water at high pressure.
We recommend at least one daily clean of the components in the juice squeezing zone (cups,
squeezing balls, drip tray, filter, blade and cover), following the cleaning instructions.
The product provided by the machine is citrus juice with a pH level of 4.5, which is not considered
as being a potentially dangerous foodstuff.
6.1. INITIAL START UP
Choose the right cup and ball size, depending on the size of the oranges you intend to juice, modify
the classifier position (Fig. 6-7) and check whether you need to add the rubber accessory. See
chapter on ACCESSORIES.
Fit all parts in the correct position. You can see assembly in point 10 (cleaning).
Once the machine is switched on, the display will show either a number between 1 and 50 or the
letter C. The number indicates the quantity of fruits to be squeezed, while the letter C sets the
machine to squeeze continuously for approximately 30 minutes.
To set the number of oranges to squeeze, press the SELECT button repeatedly to increase the
number (from 1 to 50, followed by the letter C; 1,2,3, ..........48,49,50, C,1,2,3....). Alternatively, press
and hold the SELECT button for 2 seconds and the number will decrease. Continue until you
visualize the wanted number.
The selected number will be stored on the display after the first complete squeeze cycle is finished.
The number will be stored even if the machine is switched off. You may change the number
repeating the complete number selection process.
Press the ON button to start squeezing. During the process, the display will show the remaining
amount of fruits to be squeezed. If you wish to repeat the process, simply press ON. To stop the
process, press the STOP button.

6.2. STOPPING

With the machine running, press the Stop button. The display will show the Timer and the word Stop
and the machine will stop when the two halves of the orange have been squeezed and the cup has
reached the vertical position. The display will then show the number of the previous selection.
26

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis