Transport And Storage; Assembly; Assembly The Product - Bosch Rexroth PRC7000 MGDM Betriebsanleitung

R911381901 | Rexroth PRC7000 MGDM
permanent
flashing 2 times Device is in hot plug phase 2
orange then green
permanent
flashing green RT-Status has changed from fast-forward to loopback
flashing red and Application error
orange in
alternation
flashing green and As long as communication warning is present
red in alternation
red permanent Communication error
flashing yellow Identifikations request
flashing red Watchdog error, application is not running
Tab. 13: LEDs „ S1" and „ S2" Sercos 1 and 2 Link
State Meaning
dark No connection to network
green Link, connection established
flashing yellow Data transfer active

17 Transport and storage

• Please ensure that the product is not exposed to conditions outside
the specification during transport (refer to Chapter Technical
data).
• Please ensure that the product becomes acclimatized after storage/
transport in a cold environment before it is used.
• The product should only be transported over larger distances in the
original packaging or in packaging suitable for the respective purpose.

18 Assembly

18.1 Assembly the product

• Information on installation conditions (e.g. orientation, permitted ambient
temperatures) are provided in chapter Technical data.
• Information on dimensions and locations of connections are provided in chapter
18.2.
• Please note the instructions on installation and assembly in chapter 2.6.3
and chapter 3.2.
• Funktionserde am Gewindestift (siehe Abb.59) anschließen.
• Mitgelieferte Schutzkappen montieren
Bosch Rexroth AG 109/118