Transport And Storage; Product Storage And Preparation; Installation - Bosch REXROTH 3 842 558 625 Montageanleitung

6

Transport and storage


Observe the transport instructions on the packaging.

See also section "Ambient conditions".
6.1

Product storage and preparation


Set the product down on a fl at surface.

Protect the product from mechanical stress and environmental infl uences such
as dirt and humidity.
7

Installation

Danger of crushing and shearing points
Crushing and shearing of limbs.

Avoid crushing and shearing and observe the minimum distances according
to DIN EN 349

Do not reach between moving components.
Live components
Risk of death due to electric shock.

Protect all devices from contact with liquids.

Do not crush, bend and/or pull at connection lines.

When installing connection lines, secure them tightly and protect them from
mechanical loads.

In case of malfunctions, pull out the mains plug
Incorrect installation
The lifting module may be damaged and its lifespan be reduced.

Install the lifting module free from distortion.

Do not bend the lifting module during installation.
In case of structures with high stiff ness and close installation of lifting modules,
potential length compensation must be taken into account.
WARNING
WARNING
NOTICE
3 842 559 937/2019-07, MPS: Lifting module, Bosch Rexroth AG
Transport and storage 15/28