Display Of Information; Safety Instructions; Symbols; Designations - Bosch Rexroth PSI 6 757 Serie Typspezifische Anleitung

28/48 Bosch Rexroth AG
Regarding this Documentation
UI regulation and monitoring
Rexroth BOS6000 Online Help
1.3

Display of information

In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1

Safety instructions

For safety instructions, please refer to Tab. 1: Required and supplementary
documentation Rexroth PSI6xxx Weld Timer with Medium-Frequency Inverter
Instructions and Rexroth Weld Timer Safety and user information.
1.3.2

Symbols

The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step

1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.3.3

Designations

This documentation uses the following designations :
Designation
Tab. 3:
Designation Meaning
BOS 6000 Welding Software
e.l.c.b.
Earth leakage circuit breaker
FQF Force quality factor
KSR
Konstantstromregelung
PSF
Process stability
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
RCD Residual Current Protection Device
UIP
Process quality
XQR
UI control module
R911332355 | PSI 6xxx.757
application
1070 086446 Reference