Display Of Information; Safety Instructions; Symbols; Designations - Bosch Rexroth PST 6 115 Serie Typspezifische Anleitung

30/50 Bosch Rexroth AG
To this Documentation
1.2

Display of information

In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.2.1

Safety instructions

The Safety instructions please look in Tab. 1: Required and supplementary documentation
Rexroth PST6xx0 Weld timer with Thyristor power unit Instruction Manual.
1.2.2

Symbols

The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step

1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.2.3

Designations

This documentation uses the following designations:
Designation
Tab. 3:
Designation Meaning
BOS 6000 Bedienoberfläche Schweißen (Welding Software)
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
1.2.4

Abbreviations

The in this documentation used abbreviations please look in Tab. 1: Required and
supplementary documentation Rexroth PST6xx0 Weld timer with Thyristor power
unit Instruction Manual.
R911172820 | PST 6xxx.115x