Bedienungsanleitung_MC_ALU_DE_EN_RevD.docx
Scope of Delivery
After opening the packaging, please inspect the product for eventual transport damage. In case of
damaged items contact your dealer and do not operate the unit for safety reasons.
The following parts are delivered. Please check them carefully. Should one of these parts be missing,
please contact your dealer or call us directly.
The following parts are delivered with the autoclave, please check:
•
Autoclave Chamber MultiControl Alu and lid
•
Controller unit MC2
•
Manometer with gasket and nut
•
Steam release cock with venting nozzle, gasket and nut
•
Instrument tray with water level indicator
•
Cleaning needle for venting nozzle (at steam release cock)
•
The basic version of the PC software - available on
support@certoclav.com
•
Mains cable
•
Power connection cable from controller to autoclave
•
Manual and warranty certificate
If something is missing please contact CertoClav Sterilizer GmbH.
Additional we offer the following accessories:
•
Art. no. 8583010 Wire basket diam. 23, stainless steel
•
Art. no. 8582010 Exhaust air filter (0,01 micron) complete with condensation bucket 5L
and hose (1,0m)
•
Art. no. 8582011 Exhaust air filter cartouche
•
Art. no. 8582020 Condensation bucket (5L) and hose (1,0m)
•
Art. no. 8582016 Hose (1,0m) for mounting to steam release cock (diam. 10mm)
•
Art. no. 1250499 Service Set 1 with all gaskets
•
Art. no. 8500482 Water distiller. We recommend using distilled water
•
Art. no. 1300187 protocol printer with connection cable
•
Art. no. 8500496 thermal paper for protocol printer
•
Art. no. 8500210 PC Software professional version.
For further information about our product range visit:
CertoClav Sterilizer GmbH
Peintner Strasse 10
A-4060 Leonding / Austria
www.certoclav.com
.
support@certoclav.com
www.certoclav.com
www.certoclav.com
Page 31 of 44
at or contact us