Reminders For Cleaning; Safety And Control Devices; Disposal Of Packaging And The Appliance; Risks Due To Noise - Proxe70 74EFRT Anweisungen Für Installation, Gebrauch Und Wartung

and appliance maintenance must be carried out by
qualified technicians authorized by the manufacturer,
in compliance with current safety standards and the
instructions given in this manual.
•
Identify the specific appliance model. The model
number is detailed on the packaging and on the
appliance data plate.
•
The appliance must be installed in a well-ventilated room.
•
Do not obstruct any air vents or drains present on the
appliance.
•
Do not tamper with appliance components.

REMINDERS FOR CLEANING

•
Clean the satin finish stainless steel exterior surfaces,
the cooking wells and the surface of the hotplates
every day.
•
At least twice a year, have an authorized technician
clean the internal parts of the appliance.
•
Do not use direct or high pressure water jets or steam
cleaners to clean the appliance.
•
Do not use corrosive products to clean the floor or
shelf beneath the appliance.
•
Do not use flammable products to clean the appliance.

3. SAFETY AND CONTROL DEVICES

SAFETY THERMOSTAT
The manufacturer will not be liable for any damage or
injury resulting from failure to observe the following rules.
20
General Information
•
The appliance is equipped with a manual reset
safety thermostat which interrupts heating when
the operating temperature exceeds the maximum
permitted value.
•
To restore appliance operation, open the door and
press the thermostat reset button. This procedure
may only be carried out by a qualified, authorized
technician.

4. DISPOSAL OF PACKAGING AND THE APPLIANCE

PACKAGING
The packaging is made using environmentally friendly
materials. The plastic recyclable components are:
•
the transparent cover and the bags containing the
instructions manual ( made of polyethylene - PE.).
•
the straps (in polypropylene - PP).
APPLIANCE
The appliance is manufactured 90% from recyclable metals
(stainless steel, aluminum sheet, copper.... ).
The appliance must be scrapped in compliance with
current regulations governing such disposal.
•
It must be disposed of properly.
•
Make the appliance unusable before scrapping.

5. RISKS DUE TO NOISE

•
As regards airborne acoustical noise emissions, the
Aweighted sound pressure level is below 70 dB(A).