Herunterladen Inhalt Inhalt Diese Seite drucken

Veromatic MBI01 Installation, Bedienung, Wartung Seite 51

Instantkaffeemaschine
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7 Malfunctions & repairs
Display malfunction messages
7.1
This machine features advanced malfunction analysis. When something is wrong, a message will
appear on the display. Often the operator will be able to solve these malfunctions.
ATTENTION! The solution to the malfunction is only intended as a tip. You have to consult the
extended instructions in the relevant chapters of this manual to find the solution to this malfunction. If
you cannot solve the problem, please consult with your dealer.
Message type
Warning
Machine requires service!
Warning
Water filter dirty warning
Busy
Temperature too low
Busy
Boiler is filling
Error
Drip tray full
Error
Boiler stopped filling
... container is empty
Error
Maintenance
Service date reached
Maintenance
Water filter saturated
Serious error
Boiler error
Other malfunctions are listed below:
Malfunction
Machine only
The canister is empty
delivers water
A canister is blocked
A mixing bowl is clogged
No action/lightning
Main power switch is off
No mains voltage
Product is aqueous
Bridging in the canister
or powder too old
Canister is almost empty
Machine asks to
Cup is not positioned
place a cup
appropriately
A transparent cup is used
(these are not always
detected!)
Message
Warning about the service date that is coming up
Warning about the water filter that needs a
replacement
Wait for the boiler to reach the required
temperature
Wait for the boiler to reach the minimum water level
Empty the drip tray
Restore water supply and restart the machine
Refill the container and reset the counter
Machine needs service from the operator
The water filter needs a replacement
Please call the operator
Possible cause
51
Solution
Solution/Check
Fill the canister
Remove the blockage
Clean the mixing bowl
Turn main power switch on at the back of the
machine
Is the power cable attached appropriately?
Turn the canister once to loosen up the product
Fill up the canister and reset the counter
Position the cup appropriately
Use the glass function (see 5.1 point 6) or use an
opaque cup
EN

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Veromatic MBI01

Inhaltsverzeichnis