Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Carefully remove the drip tray from the machine and remove the grill. Empty the drip tray and
clean tray and grill with lukewarm water and a brush. The drip tray may not be placed in the
dishwasher because that may damage the finish.
7
Clean the dispense area.
8
Reinstall the grill in the drip tray and put the drip tray back in its place.
9
Clean the exterior of the machine with a light damp cloth.
10
Close the door.
Press the "Go back" key to leave the Rinse menu and to resume normal operation.
11
Take a 'test' consumption of every product.
12
!
ATTENTION:
Be assured that following a maintenance all detachable parts are replaced to their
normal position before restarting the operation of the machine.
Weekly maintenance
6.6
6.6.1
Cleaning instant mixers
1
Open the door of the machine (the machine is now in service mode and on the screen you see
the rinse menu.
2
Turn the spouts of the product canisters upwards.
3
Remove the product canisters from the machine.
4
Clean the mixing systems.
•
Remove the outlet hose from the mixer house.
•
Turn the mixer locking ring counter clockwise.
•
Pull the mixer house and the funnel forward so they
detach from the mixer plate.
•
Remove the mixer paddle from the mixer axis.
•
Remove the mixer plate by turning it further counter
clockwise until the position.
•
Pull the mixer plate now forwards to remove it from
the mixer base.
•
Clean all parts in a bucket with hot water and brush
them clean.
•
Clean the exhaust channel.
•
Replace all parts in the reverse order. When placing
47
EN
Werbung
Inhaltsverzeichnis
