6.6.2
Filling product canisters
To ensure continued proper operation of this machine, it may only be filled with products that are
prescribed by your dealer.
1
Open the door of the machine.
2
Open the upper lid.
3
Turn the spouts of the product canisters upwards.
4
Remove the product canisters from the machine.
5
Remove the lids of the product canisters.
6
Fill the canisters to maximum three quarters of the capacity.
!
ATTENTION!
Maximum filling will lead to spillage and cause poor hygiene. Overfilling can prevent
proper functioning of the machine. The products may not be tamped down!
7
Replace the lids on the product canisters.
8
Place the product canisters back into the machine.
9
Turn the spouts of the product canisters back into the correct position.
To rinse → see daily maintenance paragraph 6.5.
10
11
Adjust the ingredient counters.
12
Close the upper lid.
13
Close the machine.
Take a 'test' drink from every product.
14
49
EN