Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Hygiene
1.5
For a good hygiene and safety it is important to maintain the machine according to the regulations.
Clean the product canisters and the removable parts that come into contact with food according to the
regulations in this manual and make sure they are thoroughly dry before replacing them in the
machine.
Ingredients
1.6
Observe the storage and application regulations on the packaging of the ingredients. Make sure that
the ingredients do not become moist. Remove the ingredients that have been in the canister too long
or if you have doubts about their quality.
Ventilation openings
1.7
Prevent objects or liquids from entering the machine through the ventilation openings. Immediately
pull out the plug if liquids enter the machine inadvertently. Never spray water with a hose or other
implement in the direction of the machine.
Water filter
1.8
The water filter (optional) has to be replaced every 6 months, or after about 30,000 drinks. Your
dealer can inform you about this. A water filter used too long is detrimental for the operation of the
machine and can be dangerous for the health.
Do not use the water filter in areas where the water is not safe microbiologically or in areas where the
quality of the water is unknown. Follow the installation regulations as described in paragraph 3.1 or
follow the installation directions for the water filter.
Water temperature
1.9
In the machine there is also a water boiler with a water temperature of 80-95°C. The water remains
hot for a long time, even when the machine has been turned off.
Keep your hands away from the spout / cup when taking a drink or when rinsing, to prevent burns
caused by the hot water.
1.10 Dispense time
The drink will be dispensed almost immediately after making the selection.
1.11 Electrical safety
,
BEWARE:
No parts may be removed if it requires tools. This may only be done by a licensed technician. See also
paragraph 3.1.
Do not use objects to poke into the different openings of the machine and do not spray water into or
on the machine. The machine may also not be placed in areas where cleaning takes place with steam
or high pressure devices.
1.12 Liability and warranty
With reference to the (Metaalunie) terms of delivery of Veromatic International BV, it is not liable and
liable for warranty as a result of:
•
normal wear and tear
•
external damage
•
faulty and injudicious use
•
Installation, assembly, modification or repair not carried out according to the manufacturer's
guidelines
•
not or incorrectly performed maintenance
•
defects in or unsuitability of goods or used materials or tools by instructions or third partie
32
EN
Werbung
Inhaltsverzeichnis
