Kessel EasyClean free Einbau- Und Betriebsanleitung Seite 26

4.5 Establishing electrical connections
Connection diagram
(a) Mains (400 V AC 50 Hz)
(b) Pump (400 V AC 50 Hz)
(c) Potential-free contact
(d) Remote control (when the remote control is connected, remove the bridge (e))
(d1) ON
(d2) OFF
(d3) Control lamp for pump in operation
(e) Bridge
Connecting the control unit
Select a suitable position for attachment of the control
unit.
Set up connections (pump, solenoid valve(s) if necessary,
mains cable) in accordance with the connection diagram.
Carry out a functional test (see "Functional test",
page 27).
4.6 Mount the accessory parts
Connecting Storz-B coupling
Connect the Storz-B coupling to the riser pipe/disposal pipe provided by the customer.
If the Storz-B coupling is to be positioned at some distance outside the building, the KESSEL disposal chamber (acces-
sory) can be used for this.
26 / 112 016-189_01