Auriol HG04705 Bedienungs- Und Sicherheitshinweise Seite 21

Follow these steps:
1. Press and hold down the MODE button
blinks in the display. Press the + or – button
Note: The AM symbol in the time display
12 hour mode. The PM symbol in the time display stands for after noon in
12 hour mode.
2. Confirm your setting by pressing the MODE button. The temperature unit "°C "
or "°F" flashes in the display. Press the + or – button to choose the desired
temperature unit.
3. Confirm your setting by pressing the MODE button. The barometric pressure's
unit flashes in the display. Press the + or – button to set the desired unit (hPa /
inHg).
4. Confirm your setting by pressing the MODE button. The time zone indicator
flashes in the display. Press the + or – button to set the desired value (-2 to +2).
Note: Should you be in a country in which the DCF signal can be received but
the time is different to your current local time, you can use the time zone setting
to have the product display your current local time. If you find yourself in a coun-
try in which, for example, the local time is an hour ahead of Central European
Time (CET), you set the time zone to +01. The product is now still controlled by
DCF but shows the time as one hour ahead of CET.
5. Confirm your setting by pressing the MODE button. The hour value of the time
display flashes. Press the + or – button to set the desired value.
Note: The time and date settings will be done automatically if the weather
station receives the DCF signal. You should manually adjust the time and date
if you have no reception of DCF.
for about 3 seconds. "12 Hr" or "24 Hr"
34
, to choose the desired hour format.
35 36
stands for before noon in the
7
GB 19