Stand Alone Operation - EuroLite LED KLS Next FX Bedienungsanleitung

Stand Alone Operation

Automatic mode
In automatic mode, 26 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until Aut is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to select the desired show program. AutP =
= Laser, AutF = Strobe LEDs or AutM for a combination of all devices. Confirm with the ENTER button.
3 Adjust the number of the desired program with the buttons UP and DOWN.
4 Confirm with ENTER. The display indicates the menu item running speed.
5 Adjust the running speed from S.01 (slow) to S.99 (fast) with the buttons UP and DOWN.
6 Confirm with ENTER. The display indicates the menu item rotation of the
7 Adjust the rotation from M.00 (slow) to M.99 (fast) with the buttons UP and DOWN.
8 Confirm with ENTER.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until Sou is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to select the desired show program. SouP =
SouL = Laser, SouF = Strobe LEDs or SouM for a combination of all devices. Confirm with the ENTER
button.
3 Use the buttons UP and DOWN to adjust the number of the desired program. Confirm with ENTER.
4 Adjust the microphone sensitivity with the control SENSITIVITY. The LEDs and laser are switched off
after 5 seconds if the volume is too low or if there is no sufficient bass beat.
Individual color mix
In the color mode CoLo the UV strobe LEDs are switched off and the m
constantly in red, green, blue and white. It is possible to adjust the flash frequency of the strobe LEDs and
the brightness of the spots.
1 Press the MENU so many times until CoL is indicated in the display. Confirm with the ENTER button.
The display now indicates CoLo.
2 Press the ENTER button. Now the display indicates the letter R for the color and the corresponding
brightness value.
3 Use the buttons UP and DOWN to adjust the desired brightness.
4 Confirm with the ENTER button. Now the color green can be adjusted; then blue and white.
5 The settings for the m
adjust the flash frequency from S.01 (slow) to S.99 (fast).
and spots are the last menu item. Use the buttons UP and DOWN to
ushrooms
35/48
and spots, AutL
Mushrooms
.
mushrooms
and Spots,
Mushrooms
and the spots light
ushrooms
00129744, Version 1.0