Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
After connecting the device to the mains, the spot starts running. This unit has two operating modes. It can
be run DMX-controlled or as a stand alone unit.
STAND ALONE OPERATION
In stand alone mode, the LED spot can be operated without a controller.
Fuzzy sound controlled color change
In order to select "Fuzzy sound controlled color change" (i.e. the program continues automatically after 10
seconds without music or bass-beat.), set dip switches 7, 8, 11 and 12 to ON on the master device..
12-color fade
In order to select "Color fade", set dip switches 7, 11 and 12 to ON on the master device.
Adjust speed via dip switches 2 ,3, 4, and 5.
Strobe
In order to select "Strobe", set dip switches 6, 7, 11 and 12 to ON on the master device.
Adjust speed via dip switches 2, 3, 4, and 5.
Flash
In order to select "Flash", set dip switches 8, 11 and 12 to ON on the master device.
Adjust speed via dip switches 2, 3, 4, and 5.
Sound controlled color change with Strobe
In order to select "Sound controlled color change with Strobe", set dip switches 6, 8 and 12 to ON on the
master device.
Static colors
In order to select "Static colors", set dip switches 9, 11 and 12 to ON on the master device.
Select colors via dip switches 1 to 6.
DMX-CONTROLLED OPERATION
You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Addressing the device
Set all Dip switches to OFF on the master device.
Dip switches 1 - 9 set the DMX address.
Each device occupies 5 channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DIP switches
as set out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
22/24
00056456.DOC, Version 2.2
Werbung
Inhaltsverzeichnis
