5.8.1.
Removal
•
Decommission the power generator.
•
Remove the switch box cover, for this remove the 7 screws and remove the switch box cover.
•
Disconnect the negative cable from the battery by loosening the corresponding terminal
clamp.
•
Likewise, disconnect the positive cable from the battery by loosening the corresponding termi-
nal clamp.
•
Remove the tension rod, by opening the wing nuts.
•
Battery can now be removed.
•
Insulate the terminal clamps of the battery cables or secure the power generator from getting
started.
5.8.2.
Installing
•
Re-assemble is carried out in the reverse order of work.
•
Clean the battery with a clean cloth.
•
Lightly grease the terminals with battery-grease or petroleum jelly.
•
Screw the connecting terminals tightly to the battery terminals.
•
Attach the switch box cover in position and tighten the seven screws.
Seite 32