Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - Scheppach OX 1 Serie Originalanleitung

Hydraulische holzspalter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Maintenance

Always switch motor off for retooling, adjustment, and
cleaning.
Pull power plug.
selves.
Repairs and maintenance work at the electrical installation
must be carried out by qualified electricians!
Our recommendations:
Splitting knife
Two-hand safety mechanism
Moving parts
bark etc.)
Checking the hydraulic oil level.
en screw fittings if necessary.
Checking the oil level
than the surface of the oil tank.
and the machine must stand level.
When do I change the oil?
environment or to mix it with other waste.
We recommend the following hydraulic oils:
Mobil DTE 11
Shell Tellus 22
Do not use other types of oil! Using other oils will affect the
function of the hydraulic cylinder.
Splitting beam
The beam must not run dry.
Hydraulics
Check oil level regularly.
tighten if necessary.
working area and have suitable tools ready and in good
14 english
condition.
conditions; if the machine is heavily used, the intervals will
be shorter accordingly.
-
a soft cloth, dry or moistened with a little neutral cleaning
cause this might damage the surfaces.
-
skin and wash off well after use.
Accident Prevention Standards
who are well aware of the contents of this manual.
tegrity of the safety mechanisms and ensure that they are
working correctly.
tions.
ed. Under no circumstances must the machine be used for
-
Wide, loose clothing, belts, rings, and necklaces should
not be worn. Long hair should be tied back.
During cleaning or maintenance work the machine must
It is strictly prohibited
ty mechanisms or with safety mechanisms disengaged.
-
It is strictly prohibited to remove or modify safety mecha-
nisms.
You should not carry out any maintenance or adjustments
before having carefully read this manual.
The given maintenance schedule must be observed for
machine.
The warning labels must be always clean and legible and
must be observed in order to avoid accidents. If labels are
be used. A burning machine must not be extinguished with
water because of the risk of a short circuit.
If the fire cannot be extinguished immediately, watch for
Dismantling and Disposal
The machine does not contain any materials that are haz-
ardous to health or the environment, because it is manufac-
-
-
-
-
-
-
-
-
-
-
-
-

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis