Intended Use; Residual Risks - Scheppach OX 1 Serie Originalanleitung

Intended Use

This machine complies with the current EC machinery direc-
tive.
structions as well the dimensions stated in the technical
obeyed.
trary modifications of the machine exclude any liability
of the manufacture for damages arising from this.
and original tools from the manufacturer.
The manufacturer assumes no liability for damages aris-
risk.

Residual Risks

The machine was designed according to the state of the
art and accepted safety standards. However, residual risks
might occur during work.
tended use
served.
Components, Fig. 1
12 Wheels
14 Travel adjustment bar
15 Motor
12 english
-
-
-
-
safety instructions, in-
-
Transport
Transport with a fork lift truck:
Tilt it carefully to the side with the wheels and let it glide
Attention:
Manual transport, fig. 2
on its wheels and can be moved.
Transport with a crane:
Never lift the machine at the splitting knife!
Storage conditions:
Maintain the following storage conditions:
- dry, sheltered storage location
tions:
minimum
temperature 5 C°
humidity
Setting-up
and must stand stably on a level, solid underground.
Assembly
fully assembled.
Mounting of operating levers, Fig. 3
of a hexagon screw (D) M10 x 30 and 2 shims D20 and
locknut M10. Tighten the locknut but make sure that the
Mounting the retaining clip
screws M 6x35, 8 shims D12 and 4 locknuts M6.
agon screws M10 x 30, 2 intermediate washer D 50, 4
shims D20 and 2 locknuts M10.
Mounting the table
table may be mounted in 3 different heights. There are
-
maximum recommended
40 C° 16 C°
95 % 70 %
-
-