Nordcap mychef iSensor S Bedienungsanweisung Seite 42

The associated indicator will light up to signal which process is active. Once the process has
finished, the indicator will turn off.
If packing cycle repetitions have been configured (REPEAT), they will be performed once the
packing process begins. The "REPEAT" icon will light up, in addition to the "VACUUM", "EXTRA
VACUUM" or "AIR" icons depending on whether the process corresponds to the vacuum, extra
vacuum time or atmospheric pressure recovery. After each repetition, the digit below the
"REPEAT" icon decreases in value until the last packing cycle.
All processes, with the exception of vacuum chamber pressure restoration, can be cancelled by
pressing the centre button while they are running. By doing so, the appliance will progress to
the next step in the cycle until the air entry stage, at which point the cycle will end.
If the vacuum is not correctly completed, an error will be displayed (see 8).
A rest period of 3 minutes between cycles is recommended.
16