Introduction; Technical Features; Functional Equipment; Design Features - Nordcap mychef iSensor S Bedienungsanweisung

1.

INTRODUCTION

This document has been prepared in order to provide reliable and helpful information
regarding the use of the appliance. The manufacturer waives all liability, whether express or
implied, for any possible errors or omissions that the manual may contain.
Before operating or using this appliance, read this manual carefully and thoroughly.
The owner of the appliance is responsible for requiring all personnel in charge of use
and maintenance to read this manual.
2. TECHNICAL FEATURES
2.1 Functional equipment
Removable sealing
•
connections.
Inert gas input optional on all models.
•
This optional
manufacturing; it must be requested
previously as it cannot be added later.
Progressive pressure restoration to
•
prevent damage to the bag caused by
bones, etc.
All steps of the process are visually
•
monitored.
Extra vacuum to force air out of porous
•
products.
"OIL AUTO-CLEAN" process, oil self-
•
cleaning system.
External vacuum as standard for all
•
countertop models.
2.2 Design features
Made of stainless steel.
•
Transparent methacrylate lid to allow for
•
a view of the product being packed.
bar without
determines the
Memory for up to 10 programs.
•
External vacuum accessory for all
•
countertop iSensor models (optional).
Polyethylene plate inside the chamber
•
that increases the speed of the vacuum
and regulates the working height.
Sensor-controlled vacuum.
•
Self-calibration system
•
Smart mode for packing liquids and
•
porous products.
Double 2x3 mm seal for countertop
•
iSensor vacuum packers.
Equipped with Bluetooth 4.0 or higher
•
for connection with the "mychef iSensor"
app available on IOS and Android, for the
management of packaging programs and
label printing.
The accessory TVAA0036 - Label printer
with Bluetooth LE is required for label
printing.
Well with rounded edges for easy
•
cleaning.
Rear display to check the oil level.
•
3