Manual Mode - Nordcap mychef iSensor S Bedienungsanweisung

sealing time with the iSeal algorithm and restores the atmospheric pressure in the chamber
automatically.
The iVAC control algorithm, patented by Mychef, detects and finalises the vacuum process
automatically according to the type of food and its physical conditions. It is especially suitable
for packing porous foods and liquids, since it keeps them from coming to a boil and spilling out
of the bag.
In addition, the iSeal algorithm regulates the sealing time for each cycle to prevent the bar
from overheating and burning the bag. This allows the temperature of the bar to be adjusted
to each seal, lengthening the useful life of all its components and ensuring perfect seals
regardless of the number of cycles previously performed.
To start this mode, select the automatic mode and lower the lid once the "AUTO" icon is on.
7.3.2 Manual mode:
Manual mode gives the user exhaustive control over the packing parameters and allows the
user access to some special features, such as vacuum cycle repetition and extra sealing times.
On selecting the "MANUAL" icon, the "PROG" icon in the lower left-hand side of the screen will
light up and the digit next to it will indicate the program selected. By default, this digit will be
0. On pressing the centre button, the program icon will flash and it will be possible to select
from the different programs using the direction buttons (right and left).
This mode has 10 packing programs, from 0 to 9. They allow you to set the packing parameters
for a specific purpose, such as making marinades or vacuum packing products with bones that
may damage the bag. The programs also make it possible to save these parameters in the
memory and load them quickly each time you want to perform packing processes with the
same characteristics. These values do not need to be modified or entered every time, making it
easier to perform specific packing processes multiple times.
To modify the parameter values, press the centre button with the program to modify selected.
On the right-hand side of the LCD screen, the icon corresponding to the parameter to be
modified will start to flash. For example, if you are modifying the level the vacuum should
Figure 5. Automatic mode.
Figure 6. Manual mode.
12