General Description; Scope Of Delivery; Overview; Functional Description - Parkside PDRA 20-Li A1 Originalbetriebsanleitung

GB IE
The device is part of the Parkside X 20 V
TEAM series and can be operated using
Parkside X 20 V TEAM series batteries.
The batteries may only be charged using
chargers from the Parkside X 20 V TEAM
series.

General Description

The diagram of the most im-
portant functional elements can
be found on the foldout side.

Scope of Delivery

Carefully unpack the appliance and check
that it is complete:
- Device
- Spray lance
- Suction hose
- Mesh bag
- Cleaning agent nozzle with container
- Cleaning agent bottle
with 500 ml of cleaning agent
- Instructions for use
Battery and charger are not
included.
Dispose of the packaging material correctly.

Overview

1 Ventilation slits
A
2 Release button
3 Switch lever
4 Water connection
5 Guide rail
6 Cleaning agent container
7 Cleaning agent nozzle
8 Nozzles
9 Spray lance
10 Cleaning agent bottle
11 Suction hose with filter basket
12 Mesh bag
13 Rechargeable battery
16
14 Release button
15 Charger

Functional description

The cordless pressure washer cleans and
irrigates using a water jet.
If necessary, it can also be operated with
the addition of cleaning agents.
For the functions of the operating elements
please refer to the subsequent description.
Ensure that the safety instructions are always
observed!

Technical data

Cordless pressure
washer ....................PDRA 20-Li A1
Motor voltage U ..........................20 V
Weight (incl. accessories/
Cleaning agent) ...................... ca. 2.3 kg
Degree of protection ......................... IPX0
Rated pressure/
Working pressure (p max.) ......... 2.2 MPa
Max. intake pressure (p in max) .. 0.5 MPa
Max. rated flow rate. ................... 2 l/min
Suction hose .................................... 6 m
Cleaning agent tank volume ..........400 ml
Sound pressure level
(L ) .......................78 dB(A); K
pA
Sound power level (L
measured .............89 dB(A); K
guaranteed ........................... 92 dB(A)
Vibration (a ) .......≤2,5 m/s², K= 1,5 m/s
h
The values for noise and vibration were
determined according to
EN 60335-2-54:2008+A11:2012
+A1:2015.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
= 3 dB
pA
)
WA
= 3 dB
WA
2