probst RG-SAFELOCK Betriebsanleitung Seite 45

Operation
The concrete pipes to be gripped must be completely hardened!
Attach the device to the carrier/hoist with the suspension
eye
Set the grab range and height-adjustable support according
to the material to be lifted (concrete pipe)
1. Position and lower the unit over the material to be
gripped until the height-adjustable support rests
on it
5450.0006
2. Move the suspension eye in the baffle to position
A "Grip
3. Carefully lift the gripping material and transport it
to its destination. Device is securely locked - in case
of "slack rope formation" no loosening of the
material to be gripped.
V1
17 / 22
GB