Start-Up - G&D DVIVision-USB 2.0 Series Installationsanleitung

Start-up

Start-up
After the DVIVision-USB 2.0 system has been properly installed, it can be immedi-
ately put into operation.
Mind the following activation sequence while initiating the system for the first time:
1. Turn on the user module (DVIVision-CON).
2. Turn on the computer module (DVIVision-CPU).
3. Turn on the computer that is connected to the computer module.
NOTE:
The recommended activation sequence ensures that the DVIVision-USB 2.0
system is able to read out the features of the connected monitor and to transmit
them to the computer (see DDC transmission with cache function on page 16).
After the system has been turned on, the LEDs on the front panel of both the com-
puter module and the user module signal the system's operating status. For further
advices on this topic, also see the chapter Status displays on page 12 ff.
11 · G&D DVIVision-USB 2.0