Inhaltsverzeichnis
Werbung
1.
Press the "HOLD"-button to freeze the display, the "HOLD" indicator will
appear.
2.
Press the "HOLD"-button to return to normal operation.
5.13. Flashlight
Press and hold the "
"-button to turn the flashlight on. Release the button to
turn the flashlight off.
6. Maintenance
Your digital multimeter is a precision electronic devise. Do not tamper with the
circuitry. To avoid damage:
a)
Never connect more than 600 V DC or AC
b)
Never connect a source of voltage with function switch on Ω position
and
- position.
c)
Never operate the DMM unless the battery cover is in place and
closed.
d)
Battery replacement should only be done after the test leads have been
disconnected and power is off.
6.1. Battery Replacement
Follow these steps to install the battery:
*
Turn off the power and disconnect all test leads.
*
Remove the screw on the bottom case
*
Remove the battery-cover and remove the old batteries
*
Place the new batteries into the battery-compartment.
*
Replace the cover and secure it with the screw.
Note:
Batteries, which are used up dispose duly. Used up batteries are hazardous
and must be given in the for this being supposed collective container.
-25-
rms
fully
Werbung
Inhaltsverzeichnis
