Intended Use; Safety Information - Scheppach DP16VLS Original Bedienungsanleitung

• Laser module
• Operating manual

4. Intended use

The bench drill is designed for drilling in metal, wood,
plastic and tiles. Straight shank drills with a drilling
diameter from 3 mm to 16 mm can be used.
The device is intended to be used by do-ityourselfers.
It was not designed for heavy commercial use. The
tool is not to be used by persons. under the age of 16.
Children over the age of 16 may use the tool except
under supervision. The manufacturer is not liable for
damage caused by an improper use or incorrect op-
eration of this device.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.

5. Safety information

General Safety Instructions
m CAUTION!
When using power tools, observe the following basic
safety measures for the prevention of electric shocks
and the risk of injury and fire: There is a risk of injury.
Read all these notices before using the electric tool
and keep the safety instructions for later reference.
General Safety Instructions for Power Tools
m WARNING!
Read all safety instructions and guidelines care-
fully.
Failure to follow the safety instructions and guidelines
may result in electric shock, fire and/or serious inju-
ries.
Save all safety instructions and guidelines for
the future.
The term „power tool" used in the safety instructions
refers to mains-operated electric tools (with a mains
cable) and to battery-operated electric tools (without
a mains cable).
Safe working
1. Keep your work area tidy
- An untidy workplace can lead to accidents.
2. Consider environment influences
- Do not expose power tools to rain.
- Do not use power tools in damp or wet surround-
ings.
- Ensure the work area is adequately lit.
- Do not use power tools where there is a fire or
explosion hazard.
22 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
3. Protect yourself against electric shock
- Avoid body contact with earthed parts (e.g. pipes,
radiators, electric cookers, refrigerators).
Keep other people away
4.
- Do not allow other people, especially children, to
touch the power tool or cable. Keep them away
from your work area.
5. Store unused power tools safely.
- Unused power tools should be stored in a dry,
high or locked place, out of the reach of children.
Do not overload your power tool.
6.
- Your work better and more safely within the spec-
ified power range.
7. Use the correct power tool
- Do not use low-performance machines for heavy
work.
- Do not use the power tool for purposes for which
it is not intended. For example, do not use use
a circular hand saw for cutting tree branches or
logs.
8. Wear suitable clothing
- Do not wear loose clothing or jewellery that might
become caught in moving parts.
- When working outdoors, non-slip footwear is rec-
ommended.
- Wear a hair net to contain long hair.
9. Use protective equipment
- Wear safety goggles.
- Use a dust mask for work which generates dust.
10. Connect a dust extraction device
- If connections are available for dust extraction
and collection devices, make sure that these are
connected and properly used.
11. Do not use the cable for purposes for which
it is not intended
- Do not use the cable to pull the plug from the
socket.
- Protect the cable from heat, oil and sharp edges.
12. Secure the workpiece
- Use jigs or a vice to hold the workpiece securely.
This is safer than using your hand.
13. Avoid abnormal body postures.
- Ensure secure footing and keep your balance at
all times.
14. Maintain tools with care
- Keep cutting tools sharp and clean for better and
safer working.
- Follow the instructions for lubrication and chang-
ing tools.
- Regularly check the connection cable of the pow-
er tool and, if it is damaged, have it replaced by a
qualified specialist.
- Check extension cords periodically and replace
them if they are damaged.
- Keep handles dry, clean and free from oil and
grease.