Philips Essence HR7756 Gebrauchsanweisung Seite 15

Only remove the lid for cleaning purposes.
Clean the metal blade, the blade unit of the
blender and the inserts very carefully.Their cutting
edges are very sharp!
Make sure that the cutting edges of the blades
and the inserts do not come into contact with
hard objects.This could cause them to become
blunt.
Certain ingredients may cause discolourations on
the surface of the accessories.This does not have
a negative effect on the accessories.The
discolourations usually disappear after some time.
C
Wind the (excess) mains cord around the reel
on the back of the appliance.
Blender quick-clean operation
C
1 Pour lukewarm water (not more than
0.5 litres) and some washing-up liquid into
the blender jar.
2 Close the lid.
C
3 Let the appliance run for a few moments by
pressing the pulse button. (The appliance
stops running when you release the
button).
4 Detach the blender jar and rinse it with
clean water.
To clean the mixing accessory/balloon
beaters thoroughly:
C
1 Detach the gearwheels and the balloon
beaters so that they can be cleaned more
easily.
The gearwheels and the balloon beaters are
dishwasherproof.
To clean the adjustable slicing disc
thoroughly:
C
1 Turn the adjusting knob to the right to pull
the blade out of the disc.
The disc, the blade and the adjusting knob can be
cleaned in warm soapy water or in the dish-
1
2
washer.
MicroStore
C
Put the accessories (blade, insert holder) on
the tool holder and store them in the bowl.
Always end up with the insert holder.
ENGLISH
15