Philips Essence HR7756 Gebrauchsanweisung Seite 14

ENGLISH
14
Tips
C
Pour the liquid ingredients into the blender
jar through the hole in the lid.
The longer you let the appliance run, the finer
the blending result will be.
Pre-cut solid ingredients into smaller pieces
before putting them in the blender. If you
want to prepare a large quantity, process small
batches of ingredients instead of trying to
process a large quantity at once.
Hard ingredients e.g. soy beans for soy bean
milk, must be soaked in water before they are
processed.
C
Crush ice cubes by placing the ice cubes in
the jar, close the lid and use the pulse
function.
If ingredients stick to the wall of the blender jar:
1 Switch the appliance off and unplug it.
2 Open the lid.
Never open the lid while the appliance is still
running.
3 Use a spatula to remove the ingredients
from the wall of the jar.
Keep the spatula at a safe distance from the
blades (approx. 2 cm).
If you are not satisfied with the results, let the
appliance run briefly a number of times by
pressing the pulse button.You can also try to
get a better result by stirring the ingredients
with a spatula (not while the blender is
running), or by pouring some of the contents
out in order to process a smaller amount.
In some cases the ingredients are easier to
blend if you add some liquid e.g. lemon juice
when blending fruits.
Cleaning
Always unplug the appliance before you start
cleaning the motor unit.
1 Clean the motor unit with a damp cloth.
Do not immerse the motor unit in water
and do not rinse it either.
2 Always clean the parts that have come into
contact with food in hot water with
washing-up liquid immediately after use.
The bowls, the lids of the bowl, the pusher
and the accessories (except for the blender
jar) can also be cleaned in a dishwasher.
These parts have been tested for dishwasher
resistance based on DIN EN 12875.
The blender jar is not dishwasherproof!
C
To remove the lid, open it and then pull it
upwards.