Maintenance; Battery Recharge - Fora Diamond MINI Bedienungsanleitung

4. If your device with an iOS, Android system or PC is within
the receiving range, the data transmission will start and the
Bluetooth signals in blue. Once it is finished, the DM30b
will automatically switch off.
5. If your device with an iOS, Android system or PC is not
within the receiving range, the DM30b will automatically
switch off in 2 minutes.
Note:
• While the meter is in transmission mode, it will be unable
to perform a blood glucose test.
• Make sure your device with iOS (5.0.1 or higher) or Android
system has turned on its Bluetooth before transmitting the
data and the meter is within the receiving range.
• The USB port on the DM30b meter can only be used for
battery recharge. It does not have the function of data
transmission.

Maintenance

Battery Recharge

Your meter comes with a built-in rechargeable Li-polymer
battery. To optimize battery life, it is advisable to recharge
the battery when the low battery symbol "
the screen.
Important!
• It is absolutely necessary that the battery is fully recharged
every 4 months when not in use to ensure the longevity of
the battery. The battery may not be rechargeable if it is not
recharged within a period of 4 months.
• To avoid a possible shock, Do NOT insert a test strip while
the battery is charging.
• You must charge the battery immediately and reset the
date and time when the battery power is extremely low
and "
be turned on.
The meter battery may be charged using one of the following
options:
• USB cable (computer charging station)
• USB cable with an AC adapter (wall charging station) Both
the USB cable and AC adapter are included in your kit.
1. Connect the USB cable to the USB port of the meter.
" appears on
EN-12
& " appears on the screen. The meter cannot