Transferring Data - Fora Diamond MINI Bedienungsanleitung

(100 mg/dL = 5.5 mmol/L)
Note:
• Press and hold MAIN for 5 seconds to exit the memory
mode or leave it without any action for 2 minutes. The
device will turn off automatically.
• If using the device for the first time, the "---" icon will appear
when you recall the test results or review the average
result. This indicates that there is no test result in the
memory.
• Control solution results are NOT included in the day
average.
Announcement of Memory Result by
Universal Tone
Only the most recent result that was saved can be announced
acoustically. If you press MAIN to turn the meter on, you will
first hear the Long-Beep which stands for power-on and then
the most recent result.
Only the average for the last 7 days is announced
acoustically. If the 7-day average cannot be calculated, three
horizontal bars are displayed. This is signaled acoustically
with 3 long beeps representing 3 zeroes.

Transferring Data

FORA Diamond MINI offers two types of connection (either
USB Cable or Bluetooth) to transfer results. Please check your
device box for the transmission method of your device.
Data Transmission Via USB Cable (For
DM30a)
1. Install the software on your computer
Download Health Care System Software and instruction
manual provided on the ForaCare Suisse AG Web site:
http://www.foracare.ch. Follow the instructions to install the
software on your computer.
2. Connect the device with your computer using a USB Cable
Connect the USB cable to a USB port on your computer.
With the FORA Diamond MINI switched off, connect the
other end of the USB cable to the FORA Diamond MINI data
port. " " will appear on the meter display, indicating
that the meter is in communication mode.
EN-10