Parkside PESG 120 B4 Originalbetriebsanleitung Seite 10

Safety instructions
Do not weld on containers,
„ z
vessels or tubes that contain or
contained flammable liquids or
gases.
direct contact with the welding
current circuit. The open circuit
voltage between the electrode
holder and earth terminal can
be dangerous, there is a risk of
electric shock.
Do not store or use the device
„ z
in a damp or wet environment
or in the rain. Protection rating
IP21S is applicable in this case.
Protect your eyes using the
„ z
appropriate protective glasses
(DIN level 9-10), which are
fastened to the supplied weld-
ing mask. Wear gloves and dry
protective clothing that are free
of oil and grease to protect the
skin from exposure to ultraviolet
radiation of the arc.
welding current source to
defrost pipes.
Please note:
The light radiation emitted by
„ z
the electric arc can damage
eyes and cause burns to the
skin.
10 GB
Avoid any form of
Do not use the
Arc welding creates sparks
„ z
and drops of melted metal.
The welded workpiece starts to
glow and remains hot for a
relatively long period.
Therefore, do not touch the
workpiece with bare hands.
Arc welding can cause vapours
„ z
to be release that may be
hazardous to health. Be careful
not to inhale these vapours.
Protect yourself from the harm-
„ z
ful effects of the electric arc
and keep people that are not
involved in the work away from
the arc maintaining a distance
of at least 2 m.
ATTENTION!
During the operation of the
„ z
welding device, other consum-
ers may experience problems
with the voltage supply depend-
ing on the network conditions
at the connection point. In case
of doubt, please contact your
energy supply company.
During the operation of the
„ z
welding device, other devices
may malfunction, e.g. hearing
aids, cardiac pacemakers, etc.