Charging The Battery - hanseatic VSS01B16P-18.0Li Gebrauchsanleitung

Make sure that the attach-
ment (21) clicks into the hold-
er (20).
5. Completely charge the battery
to (see "Charging the battery"
on page EN-13).
All filters have already been
inserted at the manufacturing
plant. Your vacuum cleaner is
now ready to use.

Charging the battery

Completely charge the battery for
(20)
the first time. Charging the bat-
tery usually takes 4-5 hours.
(21)
The battery charge indicator (6)
has three bars. When the battery
is charged, the bottom bar lights
up red first, the second flashes;
then the second bar lights up and
the third flashes. When all three
bars light up, the display switch-
es to green and finally switches
off.
During operation, first three, than
two, and finally a green bar are
shown. It is advisable to recharge
the battery when the last green
bar starts to flash.
Start-up Page EN-13
(6)