Setting The Suction Force En - hanseatic VSS01B16P-18.0Li Gebrauchsanleitung

FAST
SLOW
1. Press the On/Off switch (2) to
turn the appliance on.
The appliance will switch on at
suction level "Fast".
2. To vacuum, push and pull the
floor nozzle across the surface
you are cleaning. Rotate the
appliance slightly to reach
corners more effectively. This
positions the floor nozzle diag-
onally.
In rare cases this can make
a whistling noise initially.
This is not a malfunction
and stops after a while.
Setting the suction
force
(3)
(2)
The appliance is equipped with
two suction levels. Set the suc-
tion level using the suction level
switch (3).
• Press the suction level
switch (3)
– once to switch from suction
level II to suction level I;
– once more to switch from
suction level I back to suc-
tion level II.
Operation Page EN-15
FAST
(3)
SLOW
(2)