Switching The Fine Dust Filter - hanseatic VSS01B16P-18.0Li Gebrauchsanleitung

foam filter (27) and the fine
dust filter (28) back into the
dust filter unit housing and put
the dust filter unit (22) back in
the dust bin (8) as described in
section "Emptying the dust bin"
on page EN-17.
Switching the fine dust
filter
WARNING
Risk of electric shock!
Improper use of the appli-
ance may lead to serious
injury or death.
Before replacing or clean-
■
ing the fi ne dust fi lter, al-
ways pull the mains plug
out of the socket.
NOTICE
Risk of damage!
Improper handling of the
appliance may result in dam-
age.
Only use the appliance
■
with the fi lters installed.
Never dry the fi ne dust fi l-
■
ter on a heater or with a
hairdryer or tumble dryer
Care and maintenance Page EN-19
etc. It will become porous
and can be damaged.
Never wash the fi ne dust
■
fi lter in a washing machine.
Only let the fi ne dust fi lter
■
air-dry.
The fine dust filter should be
cleaned regularly.
If odours cannot be removed by
cleaning or the filter is too heavily
soiled, it must be replaced.
1. Remove the dust bin (8),
and remove the dust filter
unit (22), as described in sec-
tion "Emptying the dust bin" on
page EN-17.
2. Remove the filter holder (25)
from the dust filter unit hous-
ing (26), as described in sec-
tion "Clean the foam filter and
fine dust filter" on page EN-18.
3. Separate the filter holder (25)
into the foam filter (27), the
fine dust filter (28) and rubber
seal (29).
4. Put the filter holder (25) with
the new fine dust filter (28)
back together again; put the
dust filter unit (22) back togeth-
er again, and then put this in
the dust bin (8), as described
in section "Clean the foam
filter and fine dust filter" on
page EN-18.