PeakTech 4960 Bedienungsanleitung Seite 55

Getting started with "PeakTech
To run the Interface Program, please do the following:
1. Insert the supplied USB-Interface cable into the slot at the
USB-port of computer.
2. The operation system Windows will find a new device
connected to the PC and ask for the device-driver. This
device-driver is provided with the software-CD.
3. Press and hold LASER/BACKLIGHT-button for 2 sec. to
activate the interface of the instrument.
For help and informations to the software-program press "HELP"
in the main-menu.
Press "EXIT" to close the software.
®
4960 Interface Program"
-54-