Entering Dmo Mode; Selecting Talkgroups; Making Group Calls In Dmo; Receiving Group Calls In Idle - Motorola MTM800 E Ausführliche Bedienungsanleitung

Figure 2: Direct Mode Operation

Entering DMO Mode

To enter the DMO Mode:
• From the home screen, press the
• From the home screen, select Optns → Direct Mode.

Selecting Talkgroups

From the home screen, use one of the following methods:
• Press left or right N
• Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
• Select Optns → TG by Folder. Select a folder and then a talkgroup name.
• Press R K
OTARY NOB
Note: If the R
mode.
Note: Your radio can have an access up to three levels of the folder structure.

Making Group Calls in DMO

The Group Call is received by all members of the selected group who have their units turned on and are in range.
Procedure:
1 Press and hold the PTT button.
2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
listen.

Receiving Group Calls in Idle

Procedure:
1 The radio receives a Group Call.
key. Select More . . . → Networks → Direct Mode.
MENU
key. Press Select to confirm.
AVIGATION
and rotate it until the required talkgroup name is displayed. Press Select to confirm.
K mode is set to Scroll, then you do not need to press it to enter the scrolling
OTARY NOB
Modes | 41
| | Send Feedback