Motorola MTM800 E Ausführliche Bedienungsanleitung Seite 22

22 | Getting Started
Icon
Direct Mode Operation
General Icons
/
Send Feedback | |
Description
Data Transmit/Receive — Displayed when the data connection is active. Number 1, 2, 3, or
4 indicates how much bandwidth is used during transmission (25%, 50%, 75%, or 100%).
Direct Mode Call — Displayed when the radio is receiving a Direct Mode call. The more
bars, the stronger the signal.
Direct Mode — Displayed when the radio is in Direct Mode (radio-to-radio
communication).
DMO Gateway Communication Mode — Indicates that gateway is selected. The icon has
the following states:
• Solid — while the radio is synchronized with the gateway.
• Blinking — while the radio is not synchronized or during attachment.
• No icon — during a radio to radio and repeater call.
DMO Repeater Communication Mode — Displayed when the Repeater or GW + Rep
option in DMO Mode is selected. This icon has the following states:
• Solid — while the radio has detected the repeater (for example when the radio receives a
presence signal).
• Blinking — while the radio has not detected the repeater or during attachment.
• No icon — during a radio to radio and gateway call.
All Tones Off and Duplex and Simplex Ring Muted — Indicates that all alert tones are off
and both duplex an simplex ring volume is set to 0.
• Volume is set to 0 (when Volume Adj. Mode is set to Common).
• Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is set to
Individual).
Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.
Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring volume
is set to more than 0.
Speaker Off — Indicates that audio will not sound through the speaker.
Horn and Lights — Indicates that an external alarm (for example, horn and lights) is
activated.
GPS — Indicates that a valid location coordinates are received.
RUI Logged on — Indicates that you are logged on into the radio.
RUI Pseudo Log On — Indicates that you are in pseudo logged on state.
RUI Packet Data — Indicates Pseudo Log On state when the Packet Data feature is activated
and active data session is in progress.
Table continued...