Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Process settings screen
This screen is used to make settings related to the picture quality, such as detail compensation,
gamma, and white spot compensation.
Detail settings
Gamma
settings
DSP bypass setting
[ ] indicates the factory setting
Item
Detail
Level
When "ON" is
selected.
Level dep.
Nega setting
Noise sup. setting
Set Value
OFF
Used to set whether to emphasize details.
[ON]
ON:
OFF:
– 7
The emphasis level of the detail is adjusted when [Dedail]
– 6
is set to ON.
•
increase the number:
[0]
decease the number:
7
[0.0%]
Adjusted when you want to reduce noise in black areas.
0.5%
Noise in black areas is reduced because the frequency
characteristics of areas where the image signal level falls
:
below this set value are lowered. However, fine details in
28.0%
areas falling below the set value will be lost.
28.5%
MEMO
(0.5% step)
The setting value is the value to be set for the input signal
level before GAMMA compensation.
Pixel comp setting
(White spot
compensation)
Pixel check button
Click when White spot detection
should be performed.
(When Pixel comp is ON)
Contents
changes the detail emphasis
no detail emphasis
Sharpen the detail
Soften the detail
Flare setting
ABL setting
Master black
setting
E35
Werbung
Kapitel
Inhaltsverzeichnis
