Ottobock BionicLink 60X3 Gebrauchsanweisung Seite 26

Table 6 – Recommended safe distances between portable and mobile HF telecommunica­
tion equipment and the product 'BionicLink 60X3' – for non-life-sustaining devices and
systems
Directives and manufacturer's declaration – Recommended safe distances between
portable and mobile HF telecommunication equipment and the product '60X7' Bion­
icLink
The product 'BionicLink 60X3' is designed for operation in an electromagnetic environment
where HF interference is monitored. The customer or user of the product 'BionicLink 60X3' can
help prevent electromagnetic interference by complying with the minimum distances between
wearable and mobile HF communication equipment (transmitters) and the product 'BionicLink
60X3', as below according to the maximum output of the communication equipment.
Nominal output of
transmitter [W]
0.01
0.1
1
10
100
For transmitters with no maximum nominal output specified in the table above, the recommen­
ded safety distance d in metres (m) can be determined using the equation in the respective
column, where P stands for the maximum nominal output of the transmitter in watts (W) accord­
ing to the transmitter manufacturer's information.
Note 1: The higher frequency range applies at 80 MHz and 800 MHz.
Note 2: These directives may not be applicable in all cases. The propagation of electromagnetic
factors is influenced by absorption and reflection by buildings, objects and people.
26 | Ottobock
Safety distance [m] by transmission frequency
150 kHz to 80 MHz
N/A
N/A
N/A
N/A
N/A
80 MHz to 800 MHz
d = 0.3 √P
0.03
0.09
0.3
0.95
3
800 MHz to 2.5 GHz
d = 2.3 √P
0.23
0.73
2.3
7.3
23