Specifications - NEC MultiSync M-Serie Handbuch

Specifications

Specifications
Picture Tube
Input Signal
Display Colours
Synchronisation
Range
Resolutions
Video Band Width
Active Display
Area (Factory
Setting)
Active Display
Area (Full Scan)
38 cm (15 inch) / 43 cm (17 inch) flat square CRT,
35 cm (13.8 inch) / 39.6 cm (15.6 inch) viewable image
size, 0.25 mm mask pitch, Medium-Short persistence
phosphor, semi tint screen, C
multi-layered, anti-static OptiClear coating
Analog 0.7 Vp-p 75 Ω Positive
Video
Sync Separate sync.
Horizontal sync.
Vertical sync.
Composite sync.
Analog Input: Unlimited colours
(Depends on the graphics board)
Horizontal 31 kHz to 69 kHz (Automatically)
Vertical 55 Hz to 120 Hz (Automatically)
Maximum 1280 x 1024 (65 Hz non interlaced)**
Recommended 1024 x 768 (75 Hz non interlaced)*
85 MHz (Typ.)
Horizontal M500 - 260 mm, M700 - 306 mm
(Active display area is dependent upon
the signal timing)
Vertical M500 - 195 mm, M700 - 230 mm
(Active display area is dependent upon
the signal timing)
Horizontal M500 - 280 mm, M700 - 316 mm
(Active display area is dependent upon
the signal timing)
Vertical M500 - 210 mm, M700 - 237 mm
(Active display area is dependent upon
the signal timing)
C CRT with
ROMA LEAR
TTL Level
Positive/Negative
Positive/Negative
TTL Level
Positive/Negative
E - 21