Specifications - NEC MultiSync FE Serie Benutzerhandbuch

Specifications

Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
78135291.wpc
MultiSync ® FE
Monitor
Diagonal: 17 inch/43 cm
16 inch/41 cm
Radius: 50,000 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colors
31 kHz to 92 kHz
Vertical: 55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 141 Hz
832 x 624 @ 55 to 136 Hz
1024 x 768 @ 55 to 112 Hz
1152 x 870 @ 55 to 99 Hz
1280 x 1024 @ 55 to 85 Hz ..................... NEC cites recommended resolution at
1600 x 1200 @ 55 to 73 Hz
315 mm/12.4 inches
Vertical: 236 mm/9.3 inches
325 mm/12.8 inches
243 mm/9.6 inches
AC 100 – 120 V/220-240 V, 50/60 Hz
1.1A @ 100 – 120 V/0.5A @ 220-240V
403 mm (W) x 427 mm (H) x 424 mm (D)
15.9 inches (W) x 16.8 inches (H) x 16.7 inches (D)
20.0 kg
44.1 lbs
+10°C to +35°C / +50°F to +90°F
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
-20°C to +60°C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
11
13
™ Notes
750
90° deflection, 0.25 mm grille pitch,
medium short persistence phosphor,
aperture grille CRT, multi-layered, anti-static
screen coating, dark-tint screen and
OptiClear ® screen.
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
85 Hz for optimal display performance
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
11/24/99, 8:03 AM