Lighting For First Time - RAIS/attika NEXO 100 GAS Installationsanleitung

Lighting for first time

See the separate user manual for how to use the remote control.
Before lighting the fire for the first time, ensure that all of the packaging, labels etc. are removed from
the fireplace and the glass is cleaned.
Light the gas fireplace and allow it to burn on high heat for a couple of hours.
The fireplace surface may emit a slight odour and a little smoke – this will quickly disappear and will
only happen when the fire is lit for the very first time. Ensure that the room is well ventilated during this
time. Children and pets should be kept away from the fireplace during this process. Please exercise
caution during this process: do not touch visible surfaces/glass, as these will become very hot.
The fireplace can also emit a "clicking" sound when heating up and cooling down. This is due to the
large temperature differences that the material is exposed to.
If the fireplace has not been used for a longer period of time, follow the procedure for lighting the fire
for the very first time.
NB!
Ventilate the room when you light the fireplace for the very first time. The fireplace may emit a
little smoke and a slight odour when it is lit for the first time.
Manual extinguishing of the fire
To extinguish the gas fireplace manually (e.g. if you cannot find the remote control or the remote
control has no batteries) shut off the gas supply.
56 - GB
STARTING THE GAS FIREPLACE