Positioning Flue Terminals - RAIS/attika NEXO 100 GAS Installationsanleitung

Positioning flue terminals

The table below shows how different flue terminals can be positioned in the house.
Dimension Terminal position
Directly below an opening, an opening window or ventilation
A*
duct.
Directly above an opening, an opening window or ventilation
B
duct.
At the side of an opening, an opening window, etc.
C
Below gutters or vertical drainage pipes or drainage pipes.
D
Under an eave.
E
Below a balcony or carport roof.
F
From drainage pipes or vertical drainage pipes.
G
From an internal or external corner.
H
Above the ground - roof or balcony level.
I
From a surface that faces towards the terminal.
J
K From a terminal that faces towards the terminal.
L From an opening in a carport (e.g. door, window into the home). See national regulatory requirements.
Vertically from a terminal on the same wall.
M
Horizontally from a terminal on the same wall.
N
From a vertical structure on roof.
G
Above the intersection point with the roof.
Q
There are primarily two types of flue terminals: horizontal wall terminals and vertical walls. The dimensions
of these are given in the following section.
POSITIONING FLUE TERMINALS
Distance
See national regulatory requirements.
See national regulatory requirements.
See national regulatory requirements.
See national regulatory requirements.
See national regulatory requirements.
See national regulatory requirements.
See national regulatory requirements.
See national regulatory requirements.
See national regulatory requirements
See national regulatory requirements
See national regulatory requirements.
See national regulatory requirements
See national regulatory requirements.
See national regulatory requirements.
See national regulatory requirements.
GB - 29